8 Clean Pole Installation and User’s Guide (OM720-02)
Check the power Supply
These instructions apply to both models:
M4POLE-PS:
FOUR-WHEELED CLEAN POLE with Rechargeable Power
M4POLE-NPS: FOUR-WHEELED CLEAN POLE with the AC converter brick
Step 1. Check cable position.
Check to see that the low-voltage cable is routed into the center of the “V” formed by the
power supply and is secure in the rubber strain-relief and cable guide. The cable will run up
the back of the center column.
Step 2. Check that cable is plugged in.
Mount pins
Power Connector
Mount screws
Check to see that the low voltage cable is plugged in. This picture shows the underside of the
power supply so you DO NOT need to invert it to satisfy your curiosity. The low voltage
power cord is keyed and slips on easily if oriented properly. Squeezing the levers on both side
of the connector will release it if needed. The mounting screws and pins are just shown for
reference.
