12 Clean Pole Installation and User’s Guide (OM720-02)
Connecting the Clean Pole Charger
The Clean Pole Charger only requires connection to an AC line.
Charging a Battery
To charge the Clean Pole, plug the unit into a standard outlet. The Clean Pole may be used
while the battery is recharging, however this will increase the recharge time by 30% since the
battery is being reduced while it is being charged.
Charger Control Panel
Note:
If a Clean Pole has been charging for more than 12 hours and the indicator on the
charger control panel is still not registering a full charge, the battery may need replacement or
refurbishment. Please call Planar Systems Customer Service at if you have any questions.
Batteries must be disposed of in a responsible fashion.
If in doubt regarding proper battery
disposal methods, please contact Planar Systems.
Toggle
switch
for LED
or siren
alarm
Full charge
green LED
indicator
Blinking yellow LED indicates when the
battery needs to be recharged
Full row of LEDs indicates a full charge.
LEDs decrease as the battery charge
decreases.
Green LED
indicates a proper
connection to an
AC outlet
