~
126
~
the oven is
less than 280
0
C
, the door locking of the appliance is
deactivated.
→
Always ensure that foreign objects cannot get into the closing opening
of the oven door, otherwise the automatic door locking may be blocked.
RISK OF DAMAGE!
→
The vapours that are released during the pyrolytic self-cleaning process
(e.g. by the burning of leftovers) are
not
dangerous
to persons (incl.
children and persons with health problems).
→
Pets can be very sensitive to smoke and vapours which are released
during the pyrolytic self-cleaning process. Always keep pets away from
the operating appliance. Small animals may also be sensitive to local
temperature fluctuations during the pyrolytic self-cleaning process.
It is
recommended to remove any pets from the room during the entire
pyrolytic self-cleaning process.
→
Due to the high temperatures during the pyrolytic self-cleaning process,
the interior of the oven and the oven equipment (suitable for cleaning
with the pyrolytic self-cleaning programme) may change their colour
and / or lose their shine. This process is normal and is not a guarantee
case.
→
Never
use water or detergents to remove the remaining residues after
the pyrolytic self-cleaning programme has finished. Simply remove the
residues using a microfibre cloth. Do not scrub the door seal.
NOTICE!
If the appliance is disconnected from the mains during the self-
cleaning process, the door looking remains activated. You have to connect
the appliance to the mains again so the automatic door locking can be
deactivated. However, the automatic door locking will only be deactivated
if the temperature inside the appliance is less than 280
0
C.
NOTICE!
When the seal of the oven door is damaged, it must be replaced
by the manufacturer or an authorized aftersales service or a qualified
professional only.
Original spare parts should be used only
.
P
YROLYTIC SELF
-
CLEANING PROGRAMME
:
-C
LEANING OF THE OVEN WITH HEAT
-
The default temperature of the self-cleaning programme is
factory-set
and
cannot be changed
.
The default duration of the self-cleaning programme is
factory-set
(
1.5 hours
)
but
can
be changed individually. The settable duration is
at least from 1 hour to
max. 2 hours
.
Summary of Contents for BIC8 2KB-DPY
Page 22: ... 22 ABB 1 ABB 2 ...
