~
113
~
A
FTER THE CONNECTION OF THE APPLIANCE TO THE MAINS
When you connect the appliance to the mains for the first time, all indicators are
on for approx. one second. The display indicates «
12:00
», the hour indicator
«
12
» and the corresponding indicator « » flash; the indicator «
TIME
/
SYSTEM
TIME
»
is on. You can set the
current
time
now; s. chapter 4.3.3 S
ETTING OF
THE TIME
/
SYSTEM TIME
. If the time (hours) is not set, the appliance changes to
the minute setting after approx. 10 seconds without using any operating buttons.
If still no time setting is carried out, the appliance returns to
STANDBY MODE
(s.
fig. below) automatically after
another
10 seconds without using any operating
buttons; s. chapter 4.3.2 S
TANDBY MODE
.
Before you can use the oven generally, you must set the time / system
time.
S
ELF
-
TEST OF THE AUTOMATIC DOOR LOCKING
❖
The appliance also starts a self-test of the automatic door locking. During the
self-test, the door lock closes and opens automatically. If no error code is
displayed within 20 seconds, the self-test of the door locking is completed
successfully.
If the error code «
E-3
» is indicated on the display during the self-test: see chapter
8.1 E
RROR CODES
.
Press the button «
PAUSE
/
CANCEL
» to cancel the indication of the error
code. The appliance returns to
STANDBY MODE
automatically.
4.3.1 General operation of the oven
❖
The operation of the oven is controlled by the operating buttons and the rotary
knobs for the selection of the
OVEN FUNCTIONS
and for the
TIME
and
TEMPERATURE SETTING
(
C
/
D
/ s. chapter 3.2 C
ONTROL PANEL AND
OPERATING BUTTONS
).
❖
Eight different oven functions and a pyrolytic self-cleaning programme are
selectable; s. chapter 4.8 O
VEN FUNCTIONS AND SELF
-
CLEANING PROGRAMME
.
Summary of Contents for BIC8 2KB-DPY
Page 22: ... 22 ABB 1 ABB 2 ...
