PJLink CP-WX4022WN Page 113 User Manual Download

Page: 113 / 122

113

Message

Description

The internal temperature is rising.

Please turn the power off, and allow the projector to cool

down at least 20 minutes. After having confirmed the

following items, please turn the power ON again.

• Is there blockage of the air passage aperture?

• Is the air filter dirty?

• Does the peripheral temperature exceed 35°C?

• If the projector is used at an altitude of about 1200 m (3937

feet) or higher, set ALTITUDE of the SERVICE item in the

OPTION menu to HIGH

(



If the projector is used with a wrong setting, it may cause

damage to the projector itself or the parts inside.

A note of precaution when cleaning the air filter.

Please immediately turn the power off, and clean or change

the air filter referring to the

Cleaning and replacing the

air filter

section of this manual. After you have cleaned or

changed the air filter, please be sure to reset the filter timer

(



61, 110

The button operation is not available.

Troubleshooting

Related messages (continued)

Summary of Contents for CP-WX4022WN



























































































































Search results

Summary of Contents for CP-WX4022WN

Reviews:

Related manuals for CP-WX4022WN

Brands by name

Popular brands

PJLink CP-WX4022WN, User Manual

Search results

Summary of Contents for CP-WX4022WN

Reviews:

Related manuals for CP-WX4022WN

Brands by name

Popular brands