PJLink CP-WX4022WN Page 121 User Manual Download

Page: 121 / 122

121

• Although bright spots or dark spots may appear on the screen, this

is a unique characteristic of liquid crystal displays, and it does not constitute or

imply a machine defect.

NOTE

Troubleshooting

Phenomena that may be easy to be mistaken for machine defects (continued)

Phenomenon

Cases not involving a machine defect

Reference

page

Schedule

function does

not work

The SAVING function is working.

Select NORMAL for STANDBY MODE item in the SETUP

menu.

The internal clock has been reset.

Once you turn off the projector in the SAVING mode or the

AC power, the current date and time setting is reset.

Check the DATE AND TIME setting for WIRELESS

SETUP or WIRED SETUP in the NETWORK menu.

73, 77

When the

projector is

connected to

wired LAN, it

powers off and

on as described

below.

Powers off

POWER

indicator

blinks in orange a

few times

Goes into

standby mode

Disconnect the LAN cable and check that the projector

is working properly.

If this phenomenon occurs after connecting to the network,

there may be a loop between two Ethernet switching hubs

within the network, as explained below.

- There are two or more Ethernet switching hubs in a network.

- Two of the hubs are doubly connected by LAN cables.

- This double connection forms a loop between the two hubs.

Such a loop may have an adverse effect on the projector

as well as the other network devices.

Check the network connection and remove the loop by

disconnecting the LAN cables such that there is only one

connecting cable between two hubs.

–

Unable to save

the CLONING

data

USB memory is out of memory.

Please delete unnecessary files to free up memory.

At least

MB of memory is needed.

USB memory is write-protected.

Unlock the USB memory.

67 ~ 6

Unable to load

the CLONING

saved data

Unable to find the saved data from USB memory.

Execute SAVE then LOAD by going through the procedure.

File name of USB memory doesn't match.

Please assign "pj_data.bin" for setting data, and for

MyScreen "pj_logo.bmp" or "pj_logo.gif".

STANDBY mode is set to SAVING.

Switch the SAVING to NORMAL in STANDBY MODE

under SET UP menu beforehand to load the CLONING

data using control panel on the projector while the lamp

is in standby state.

Summary of Contents for CP-WX4022WN



























































































































Search results

Summary of Contents for CP-WX4022WN

Reviews:

Related manuals for CP-WX4022WN

Brands by name

Popular brands

PJLink CP-WX4022WN, User Manual

Search results

Summary of Contents for CP-WX4022WN

Reviews:

Related manuals for CP-WX4022WN

Brands by name

Popular brands