PJLink CP-WX4022WN Page 76 User Manual Download

Page: 76 / 122

NETWORK menu

Item

Description

WIRED SETUP

Selecting this item displays the WIRED

SETUP menu for the wired LAN.

Use the ▲/▼ buttons to select an item,

and the ► or

ENTER

button on the remote

control to perform the item.

DHCP

(Dynamic Host

Configuration

Protocol)

Use the ▲/▼ buttons to turn DHCP on/off.

OFF

Select OFF when the network does not have

DHCP enabled. To save the setting, press the ►

button.
• When the “DHCP” setting changes to “ON”, it

takes a little time to obtain IP address from DHCP

server.

• Auto IP function will be assigned an IP address if

the projector could not obtain an IP address from

server even if DHCP is “ON”.

IP ADDRESS

Use the ▲/▼/◄/► buttons to enter the IP

ADDRESS.

This function can only be used when DHCP is set

to OFF.
• The IP ADDRESS is the number that identifies

this projector on the network. You cannot have two

devices with the same IP ADDRESS on the same

network.

• The IP ADDRESS “0.0.0.0” is prohibited.

SUBNET

MASK

Use the ▲/▼/◄/► buttons to enter the same

SUBNET MASK used by your computer.

This function can only be used when DHCP is set

to OFF.
• The SUBNET MASK “0.0.0.0” is prohibited.

DEFAULT

GATEWAY

Use the ▲/▼/◄/► buttons to enter the DEFAULT

GATEWAY (a node on a computer network that

serves as an access point to another network)

address.

This function can only be used when DHCP is set

to OFF.

DNS SERVER

Use the ▲/▼/◄/► buttons to input the DNS

server address.

The DNS server is a system to control domain

names and IP addresses on the Network.

(continued on next page)

Summary of Contents for CP-WX4022WN



























































































































Search results

Summary of Contents for CP-WX4022WN

Reviews:

Related manuals for CP-WX4022WN

Brands by name

Popular brands

PJLink CP-WX4022WN, User Manual

Search results

Summary of Contents for CP-WX4022WN

Reviews:

Related manuals for CP-WX4022WN

Brands by name

Popular brands