PJLink CP-WX4022WN User Manual Download

Page: 115 / 122

115

Troubleshooting

Regarding the indicator lamps (continued)

POWER

indicator

LAMP

indicator

TEMP

indicator

Description

Blinking

Red

Lighting

Red

Turned

off

Blinking

Red

The cooling fan is not operating.

Please turn the power off, and allow the projector to

cool down at least 20 minutes. After the projector has

sufficiently cooled down, please make confirmation

that no foreign matter has become caught in the fan,

etc., and then turn the power on again.

If the same indication is displayed after the remedy,

please contact your dealer or service company.

Blinking

Red

Lighting

Red

Turned

off

Lighting

Red

There is a possibility that the interior portion

has become heated.

Please turn the power off, and allow the projector to

cool down at least 20 minutes. After the projector has

sufficiently cooled down, please make confirmation of

the following items, and then turn the power on again.

• Is there blockage of the air passage aperture?

• Is the air filter dirty?

• Does the peripheral temperature exceed 35°C?

• If the projector is used at an altitude of about 1200 m

(3937 feet) or higher, set ALTITUDE of the SERVICE

item in the OPTION menu to HIGH

(



). If the

projector is used with a wrong setting, it may cause

damage to the projector itself or the parts inside.

Lighting

Green

Simultaneous

blinking in

Red

It is time to clean the air filter.

Please immediately turn the power off, and clean or

change the air filter referring to the section

Cleaning

and replacing the air filter

. After cleaning or changing

the air filter, please be sure to reset the filter timer.

After the remedy, reset the power to ON.

Lighting

Green

Alternative

blinking in

Red

There is a possibility that the interior portion

has become overcooled.

Please use the unit within the usage temperature

parameters (5°C to 35°C).

After the treatment, reset the power to ON.

(continued on next page)

Summary of Contents for CP-WX4022WN



























































































































Search results

Summary of Contents for CP-WX4022WN

Reviews:

Related manuals for CP-WX4022WN

Brands by name

Popular brands

PJLink CP-WX4022WN, User Manual

Search results

Summary of Contents for CP-WX4022WN

Reviews:

Related manuals for CP-WX4022WN

Brands by name

Popular brands