4
Introduction
Part names
Projector
(1) Lamp cover (
107
)
The lamp unit is inside.
(2) Speakers (x2) (
22
,
52
)
(3) Filter cover (
109
)
The air fi lter and intake vent are inside.
(4) Elevator feet (x2) (
26
)
(5) Elevator buttons (x2) (
26
)
(6) Remote sensor (
18
)
(7) Lens (
111
)
(8) Lens cover
(9) Pocket caps
(10) Intake vents
(11) Control panel (
5
)
(12) Lens adjuster door (
5
)
The adjusters for the lens are behind
the door.
(13)
AC
IN
(AC inlet) (
15
)
(14) Exhaust vent
(15) Rear panel (
5
)
(16) Security bar (
16)
(17) Heel
►Do not open or remove any portion of the product, unless the
manuals direct it.
►Do not subject the projector to unstable conditions.
►Do not apply a shock or pressure to this product.
►Do not look into the lens and the openings on the projector while the lamp is
on.
►Keep the pocket caps away from children and pets. Make sure they do not
swallow the caps. If swallowed consult a physician immediately for emergency
treatment.
WARNING
►Do not touch around the lamp cover and the exhaust
vents during use or just after use, since it is too hot.
►Do not attach anything onto the lens except the lens cover of this
projector because it could damage the lens, such as melting the lens.
CAUTION
(continued on next page)
