97
SECURITY menu
Item
Description
MY TEXT
DISPLAY
(1) Use the
▲
/
▼
buttons on the SECURITY menu to
select the MY TEXT DISPLAY and press the
►
or
ENTER
button to display the MY TEXT DISPLAY
on/off menu.
(2) Use the
▲
/
▼
buttons on the MY TEXT DISPLAY
on/off menu to select on or off.
ON
OFF
When it is set ON, the MY TEXT will be displayed
on the START UP screen and the INPUT_
INFORMATION when the INFORMATION on the
SERVICE menu is chosen.
• This function is available only when the MY TEXT
PASSWORD function is set to the OFF.
MY TEXT
WRITING
(1) Use the
▲
/
▼
buttons on the
SECURITY menu to select the MY
TEXT WRITING and press the
►
button. The MY TEXT WRITING dialog
will be displayed.
(2) The current MY TEXT will be displayed
on the
fi
rst 3 lines. If not yet written, the
lines will be blank.
Use the
▲
/
▼
/
◄
/
►
buttons and the
ENTER
or
INPUT
button to select and
enter characters. To erase 1 character
at one time, press the
RESET
button or
press the
◄
and
INPUT
button at the
same time. Also if you move the cursor
to DELETE or ALL CLEAR on screen
and press the
ENTER
or
INPUT
button,
1 character or all characters will be
erased. The MY TEXT can be input up
to 24 characters on each line.
(3) To change an already inserted
character, press the
▲
/
▼
button to
move the cursor to one of the
fi
rst 3
lines, and use the
◄
/
►
buttons to
move the cursor on the character to be
changed.
After pressing the
ENTER
or
INPUT
button, the character is selected.
Then, follow the same procedure as described at the item (2) above.
(4) To
fi
nish entering text, move the cursor to the OK on screen and press
the
►
,
ENTER
or
INPUT
button. To revert to the previous MY TEXT
without saving changes, move the cursor to the CANCEL on screen and
press the
◄
,
ENTER
or
INPUT
button.
•
The MY TEXT WRITING function is available only when the MY TEXT
PASSWORD function is set to OFF.
(continued on next page)
