background image

32

Operating

1.

Press 

POSITION

 button on the remote control when no menu is indicated. 

The “POSITION” indication will appear on the screen.

Adjusting the position

2.

Use the 

/

/

/

 cursor buttons to adjust the picture 

position.
When you want to reset the operation, press 

RESET

 

button on the remote control during the operation.
To complete this operation, press 

POSITION

 button again. Even if you do not do 

anything, the dialog will automatically disappear after a few seconds.

1.

Press 

AUTO

 button on the remote control.  

Pressing this button performs the following.

Using the automatic adjustment feature

  

For a computer signal 

The vertical position, the horizontal position and the  
horizontal phase will be automatically adjusted.  
Make sure that the application window is set to its  
maximum size prior to attempting to use this feature. A dark picture may still be 
incorrectly adjusted. Use a bright picture when adjusting.

  

For a video signal and s-video signal 

The video format best suited for the respective input signal will be selected 
automatically. This function is available only when the AUTO is selected for 
the VIDEO FORMAT item in the INPUT menu (

54

). The vertical position and 

horizontal position will be automatically set to the default.

  

 For a component video signal  

The vertical position and horizontal position will be automatically set to the default. 
The horizontal phase will be automatically adjusted.

AUTO

 

button

POSITION 

button

• The automatic adjustment operation requires approx. 10 seconds. Also 

please note that it may not function correctly with some input. 
• When this function is performed for a video signal, a certain extra such as a line 
may appear outside a picture.
• When this function is performed for a computer signal, a black frame may be 
displayed on the edge of the screen, depending on the computer model. 
• The items adjusted by this function may vary when the FINE or DISABLE is selected 
for the AUTO ADJUST item of the SERVICE item in the OPTION menu (

73

).

NOTE

• When this function is performed on a video signal or an s-video signal, 

some image such as an extra-line may appear at outside of the picture.
• When this function is performed on a video signal or s-video signal, the range of 
this adjustment depends on OVER SCAN in IMAGE menu (

51

) setting. It is not 

possible to adjust when OVER SCAN is set to 10.
• If 

POSITION

 button is pressed when a menu is indicated on screen, the displayed 

picture does not move its position but the menu does.
• This function is unavailable for a signal from the 

LAN

USB TYPE A / B

HDMI 1 / 2

 or 

HDBaseT

 port.

NOTE

Summary of Contents for CP-WU8451




































































































































Reviews: