PJLink CP-WU8451 Page 62 Operating Manual Download

Page: 62 / 131

SCREEN menu

Item

Description

AUTO BLANK

Using the

▲

▼

buttons switches the mode for the AUTO BLANK

screen.

BLUE



WHITE



BLACK

• To avoid remaining as an afterimage, displayed image will change

to the designated blank color screen by AUTO BLANK after several

minutes at the following conditions.

- When MyScreen or ORIGINAL is displayed as BLANK screen.

- When start-up screen is displayed.

START UP

Using the

▲

▼

buttons switches the mode for the start-up screen.

The start-up screen is a screen displayed when no signal or an

unsuitable signal is detected.

MyScreen



ORIGINAL



OFF

MyScreen : Screen can be registered by the MyScreen item (



ORIGINAL : Screen preset as the standard screen.
OFF : Plain black screen.
• To avoid remaining as an afterimage, the START UP screen will

change to the AUTO BLANK screen after several minutes.

• When the ON is selected to the MyScreen PASSWORD item in

the SECURITY menu

(



)

, the START UP is fixed to MyScreen.

(continued on next page)

Summary of Contents for CP-WU8451




































































































































Search results

Summary of Contents for CP-WU8451

Reviews:

Related manuals for CP-WU8451

Brands by name

Popular brands

PJLink CP-WU8451, Operating Manual

Search results

Summary of Contents for CP-WU8451

Reviews:

Related manuals for CP-WU8451

Brands by name

Popular brands