manualshive.com logo in svg

PJLink CP-WU8451, Operating Manual

Share
Download
PJLink CP-WU8451 Operating Manual Download Page 116

116

Maintenance

►

 Before taking care of the air 

fi

lter, make sure the power cable 

is not plugged in, then allow the projector to cool suf

fi

ciently.

►

Use only the air 

fi

lter of the speci

fi

ed type. Do not use the projector without the 

air 

fi

lter or the 

fi

lter cover. It could result in a 

fi

re or malfunction to the projector.

►

Clean the air 

fi

lter periodically. If the air 

fi

lter becomes clogged by dust or the 

like, internal temperatures rise and could cause a 

fi

re, a burn or malfunction to 

the projector.

WARNING

• Please reset the 

fi

lter time only when you have cleaned or replaced 

the air 

fi

lter, for a suitable indication about the air 

fi

lter.

• The projector may display the message such as the “CHECK THE AIR 
FLOW” or turn off the projector, to prevent the internal heat level rising.

NOTE

Cleaning and replacing the air filter  (continued)

10.

 

Put the 

fi

lter cover back into the place.

11

.

 

Turn the projector on and reset the 

fi

lter time using the FILTER TIME item 

in the EASY MENU.

(1)  Press the 

MENU

 button to display a menu.

(2)  Point at the FILTER TIME using the 

▲

/

▼

 cursor buttons, then press the 

►

 cursor (or the 

ENTER

 / the 

RESET

) button. A dialog will appear.

(3)  Press the 

►

 cursor button to select the “OK” on the dialog. It performs 

resetting the 

fi

lter time.

Summary of Contents for CP-WU8451




































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands