Pixsys STR561, User Manual

Page: 18 / 112

18 -
STR561 - User manual
Max 0.800 kg
Min 0.000 kg
In 0.389 mV/V
kg
1.168
Esc
%
Press “ m ” to calibrate lower limit and “ n ” to
for the upper limit . Press “◊%” to go back to
calibration percentage.
Value mV/V . This calibration option is available only for strain-gauge sensors
and it is basing on the setting of correct ratio mV/V for the sensor. Process
value will be calculated considering both the entered ratio mV/V and the
effective mV/V value detected by the analogue input.
Out 2.000 mV/V
Range
6.000 kg
OK
‹
‹
Use the arrow keys to set the correct mV/V
ratio of strain gauge. Press “Ok” to confirm.
In 0.389 mV/V
kg
1.168
Esc
mV
Out 2.000 mV/V
6.000 kg
Range
Press “◊mV” to go back to setting of mV/V
ratio.
For the calibration procedure refer to the following table:
Press Display Do
1
Place sensor on its minimum
operating position (related to
Lower limit calibration ).