Pixsys STR561, User Manual

Page: 34 / 112

34 -
STR561 - User manual
12.4 Configuration via memory card
The instrument can be configured quickly via a memory card (2100.30.013). The
memory card is connected to the micro-USB connector at the bottom of the
instrument.
12.5 Creation of the memory card
To save a configuration of parameters on the memory card, with the instrument
on, connect it to the micro-USB connector, enter configuration, set the
parameters necessary and exit configuration. At this point, the instrument
acknowledges the presence of the memory card and saves the configuration
just made on the memory card as well.
Memory writing...
Saving is signalled by a message on the
display.
12.6 Loading configuration from memory card
To load a configuration previously made and saved on a memory card, connect
it to the micro-USB connector and power the instrument. At this point, if the
memory card is detected and the data it contains are considered valid, the
display will view the request for loading data from the memory card.
Load data
Esc
The user can either “Load data” load the
parameters from the memory card or “Esc”
cancel the operation without modifying the
current configuration.