17
Press
Effect
Operation
1
Exit parameters
configuration. Display 2
shows the writing
.
Position the sensor on the
minimum functioning value
(associated with
)
2
Set the value to minimum.
The display shows
Position the sensor on the
maximum functioning
position (associated with
)
3
Set the value to maximum.
The display shows
To exit the standard
procedure press
.
For “virtual zero” settings
position the sensor on the
zero point.
4
Set the virtual zero value.
The display shows
N.B.: for selection of
the procedure in
point 4 should be followed
on each re-activation.
To exit the procedure press
MAX
MIN
ZERO
