PiXORD PD736, User Manual

Page: 68 / 72

Chapter 4
58
••••
Setup Execution PD736 User’s Manual
GPIO Input: On the defined days of the week and at certain time of the set
days, the Camera will trigger its GPIO Input Signal according to the set
time interval (in seconds) when its state changes. Single or 6 snapshots
may be captured at a time as defined.
Figure 4-31 Snapshot Recording with “GPIO Input” Method Selected
The stream of accumulated snapshots may be sent to host through E-mail, FTP,
stored in the SD card, Remote Disk, activated GPIO Output Port; per selection
or through all of them. When selected, the setup dialog for these methods will
display is illustrated in the following figure.