PiXORD PD736, User Manual

Page: 65 / 72

Chapter 4
PD736 User’s Manual Setup Execution
••••
55
4.4.3 Snapshot Tab
The Snapshot tabbed pane sets the Camera to take snapshot images when motion
is detected. The four methods available for selection are Always, Schedule,
Motion, and GPIO Input, each of which can be set up with user scheduled
recoding time and duration, as well as defining the video record file target
destination.
Always: Under this method, the Camera automatically continuous to capture
6 snapshots of the area under surveillance at every 1 or 2 seconds
interval. 3 previous snapshot frames are collected from the Camera
buffer and 3 snapshot frames are captured live. The stream of
accumulated snapshots may be sent to host by E-mail, FTP, stored in
the SD card, Remote Disk as preferred or through all of them.
Figure 4-28 Snapshot Recording with “Always” Method Selected
6 snapshots are continuously
collected at every 1 or 2
seconds interval.