PiXORD PD736, User Manual

Page: 16 / 72

Chapter 2
6
••••
Installation and Setup PD736 User’s Manual
2.2 Connecting Camera to Network through LAN
Router Cable
Figure 2-2 Connecting IP Camera to Network
1. Prepare a PC/notebook/ultrabook with Ethernet link to the network.
2. When PC/notebook is used, connect the LAN port of the device to the network router
with an RJ45 network cable (
1
1 1
1 2
2 2
2
).
3. Plug the DC power jack of the power adaptor ( 3 3 3 3 4 4 4 4 ) to Camera and connect the
power adaptor to power outlet (110V or 220V).
4. Connect the network router to the LAN port of Camera with an RJ45 network cable
(
5 5 5 5
).
5. With power switched on, check the status of the two LEDs at the back of camera:
LAN Router
Power Adapter