Chapter 3
10
Registration and Binding of Camera
PB731P/PB731I
User’s Manual
1) After clicking the hypertext “
Please
click to verify your registration
”
under
Create Account
(see Section
3.1.1), or clicking the
Sign in
button
under
Google Account
(see Section
3.1.2), the “Connect IP Camera”
window (shown at right) will pop-up
after confirming your name &
password. This is to remind you
again to properly connect the
Camera to power and router. If
connection is okay, click the
Next
button.
2) The “Bind IP Camera”
window
(shown at right) will pop-up to
remind you to get ready with your
Camera’s MAC Address and
Activate Code. Then click the
Next
button.
Figure 3-
5 “Connect IP Camera” Window
Figure 3-
6 “Bind IP Camera” Window
3) The
Binding
dialog will then display to prompt you to provide the Camera’s
MAC Address and Activate Code (serial number).
Figure 3-7 New Camera MAC Address & Activate Code Registration
Note that the required data are available from the Activation Card
(illustrated below) provided with your Camera and/or on the label at the
back of the Camera. Note that these numbers are unique for each Camera.
