Pixelink PPC15-CX, Instruction Manual

Page: 53 / 140

PPCxx-CX Series Flat Panel PC
Page 53
the four pilot holes and tightening them (
Figure 3-11
).
Figure 3-11: Wall-mounting Bracket
Step 6:
Insert the four monitor mounting screws provided in the wall mounting kit into the
four screw holes on the real panel of the PPC and tighten until the screw shank
is secured against the rear panel (
Figure 3-12
).
Step 7:
Align the mounting screws on the monitor rear panel with the mounting holes on
the bracket.
Step 8:
Carefully insert the screws through the holes and gently pull the monitor
downwards until the monitor rests securely in the slotted holes (
Figure 3-12
).
Ensure that all four of the mounting screws fit snuggly into their respective
slotted holes.