Pixelink PPC15-CX, Instruction Manual

Page: 87 / 140

PPCxx-CX Series Flat Panel PC
Page 87
On/Off D
EFAULT
When the power button is pressed the system is either
turned on or off
Suspend
When the power button is pressed the system goes into
suspend mode
Restore on AC Power Loss [Power Off]
Use the
Restore on AC Power Loss
BIOS option to specify what state the system
returns to if there is a sudden loss of power to the system.
Power Off D
EFAULT
The system remains turned off
Power On
The system turns on
Last State
The system returns to its previous state. If it was on, it
turns itself on. If it was off, it remains off.
Resume on LAN/Ring [Disabled]
Use the
Resume on LAN/Ring
BIOS option to enable activity on the RI (ring in) modem
line to rouse the system from a suspend or standby state. That is, the system will be
roused by an incoming call on a modem.
Disabled D
EFAULT
Wake event not generated by an incoming call
Enabled
Wake event generated by an incoming call
Resume on PME# [Disabled]
Use the
Resume on PME#
BIOS option to enable activity on the PCI PME (power
management event) controller to rouse the system from a suspend or standby state.
Disabled D
EFAULT
Wake event not generated by PCI PME controller
activity