Pixelink PPC15-CX, Instruction Manual

Page: 65 / 140

PPCxx-CX Series Flat Panel PC
Page 65
4.4 Memory Module Replacement
The PPC is preinstalled with a 512MB DDR2 memory module. If the memory module fails,
follow the instructions below to replace the memory module.
Step 1:
Remove the back cover. See
Section 3.5
above.
Step 2:
Remove the internal aluminum back cover. See
Section 4.3
above.
Step 3:
Locate the DDR2 memory module on the motherboard of the PPC (
Figure 4-4
).
Figure 4-4: SO-DIMM Socket Location
Step 4:
Remove the thermal pad off the memory module.
Step 5:
Remove the DDR2 memory module by pulling both the spring retainer clips
outward from the socket.
Step 6:
Grasp the DDR2 memory module by the edges and carefully pull it out of the
socket.
Step 7:
Install the new DDR2 memory module by pushing it into the socket at an angle
(
Figure 4-5
).