Pixelink PPC15-CX Instruction Manual Download

Page: 103 / 140

PPCxx-CX Series Flat Panel PC

Page 103

BIOS Menu 15: Boot Device Priority Settings

5.5.3 Hard Disk Drives

Use the

Hard Disk Drives

menu to specify the boot sequence of the available HDDs.

When the menu is opened, the HDDs connected to the system are listed as shown below:

1st Drive

[HDD: PM-(part number)]

NOTE:

Only the drives connected to the system are shown. For example, if only

two HDDs are connected only “

1st Drive

” and “

2nd Drive

” are listed.

The boot sequence from the available devices is selected. If the “

1st Drive

” option is

selected a list of available HDDs is shown. Select the first HDD the system boots from. If

the “

1st Drive

” is not used for booting this option may be disabled.

Summary of Contents for PPC15-CX













































































































































Search results

Summary of Contents for PPC15-CX

Reviews:

Related manuals for PPC15-CX

Brands by name

Popular brands

Pixelink PPC15-CX, Instruction Manual

Search results

Summary of Contents for PPC15-CX

Reviews:

Related manuals for PPC15-CX

Brands by name

Popular brands