2s
17
1 6
POWER
SET
Knight TR-331RX
Knight TR-331TX
En
En
How to use the transmitter of Knight TR-331TX
How to use the transmitter of Knight TR-331TX
Set Knight TR-331TX channel
1.
and
button 2s at same time for communicate
channel setting of the transmitter.
2. After pressed the
[
CH- ] and
[
+CH ] button, LCD
display shown [ ] ,
" "
means channel
number, such as shown , enter the setting mode.
Turn on the Knight TR-331TX power ,press
[
+CH ]
[
CH- ]
3. When the LCD display shown [ ] , Press
[
CH-
]
or
[
+CH
] to set of wireless channel, press
[
CH-
] to
reduce the number,
[
+CH
] to increase the numbers.
The channel can be set from 01-15, Avoid multiple sets
in the same area at the same time using the Knight
TR-331 device then mutual interference will occurred.
4. Press the button
[
CH-
] and
[
+CH]
again, the mode will
be saved and enter to stand-by mode in 4s when no
action.
5. Please confirm whether the channel is corresponded
with the receiver or not after the setting of Knight
TR-331TX channel.
Turn on the Knight TR-331TX power, it is available to
open the LCD's backlight through press [
SET
] button,
the backlight will turn off in 4s automatically when no
action on [
POWER
] and [
SET
].
Turn on the LCD backlight of Knight TR-331TX
