background image

1

3

2

Knight TR-331 Features

En

En

1.  Knight TR-331product will not support the creative CLS system of Nikon 
     wireless flashgun.
2.   Make sure the camera and flash are powered off before install TR-331 device
3.   This is electronic products accessories; some of the environment causes may affect

       the working. However this is hardly ever to get this situation, don’t worry!

4.   This component can’t be strong vibration, or may lead to product failure.
5.   For a long time non-use, please turned off the transmitter and the receiver's power 

       and remove the battery. 

6.   The batteries should not install anti-polarity; otherwise the batteries may leak 

       corrosive liquids, heat or explosion. 

7.   When connected the remote cable with the device, Do not pull the wires. 
8.   Do not put it in high temperature, such as a closed car under direct sunlight, the 

       control panel and other high-temperature areas. 

9.  keep dry, do not use wet hand contact with the product, the product must not be 

       immersed in water or exposed to rain, and this may lead to not work properly. 

10. Do not use flammable gases in violation of this warning may cause an explosion or 

       fire.

Cautions before use 

About high-performance of Knight TR-331

Knight TR-331 use global free FSK 2.4GHz wireless channel

,

15 selectable

 

channels

Knight TR-331 support to set 5 groups and each group consist of multiple 
units. Support to control each group individually

 

and 32 different

 

flash

 

modes can be set

 

at

 

most

.

Knight TR-331TX is convenient to use, You just need to set the active

 

group

 

as OFF/ON

.

Knight TR-331RX is also convenient to use,You just need to set group as 
group A, group B, group C, group D or group E.
When using the device with other incompatible I-TTL flashgun

you

 

would 

not need to set the units, Knight TR-331 will do that automatically

.

Knight TR-331 will only support SB-900 and SB-800 to flash in manual mode. 
Other flashgun model will not allow to flash in manual mode.

The maximum control distances up to 80M.

Ultra-low power consumption for standby; the standby time of transmitter 

Summary of Contents for KNIGHT TR-331

















Reviews: