21
2 0
Install Knight TR-331RX receiver on the flash bracket
3
SET
POW
ER
CH
+CH
1
Turn on the Knight TR-331RX power
2s
En
En
How to use the receiver of Knight TR-331RX
How to use the receiver of Knight TR-331RX
1 Loose the hot shoe nut by rotating to right according to picture 1.
.
2 Install Knight TR-331RX hot shoe to flash bracket according to picture 2.
.
3 Rotate the fixed shoe nut to the left for locking tightly according to picture 3.
.
Turn on the Knight TR-331RX power then set the function mode and channel before
install the flashgun for receiver.
1. Turn on the power of Knight TR-331RX, hold [
button for 2s then the power is turned on.
2. If the Knight TR-331RX power is turned on, hold [
POWER
]
for 2s will turn off the receiver power then enter into
the shutdown mode.
3. For long time non-use of receiver Knight TR-331RX , turn
off the power and remove the battery.
4. All will be defaulted as group A after turn on the
power of Knight TR-331RX.
POWER
]
