61
7.8.2 FORCE DVI
Crystalio II
will normally be able to read the EDID data from the display to correctly send DVI or HDMI mode video.
This setting allows the user to force DVI mode for instances where
Crystalio II
has been unable to determine the
correct mode.
When the
action button is pressed, the OSD turns to the following page:
When in DVI mode no audio signal can be sent from the HDMI Output Port.
7.8.3 OUTPUT SYNC POLARITY/SYNC TYPE
• Output Horizontal and Vertical sync polarities of HDMI can be defined as Positive or Negative
• Sync Polarities can be defined for HDMI (Positive or Negative). However, these Sync Polarities are only
valid when a port is set as Primary (see
Section
5.3.1
). For the Secondary ports, the actual sync will
usually revert to that of the Primary Port.
When the
action button is pressed, the OSD turns to the following page:
Primary output port
Secondary output port defined as
Secondary port actual output
HDMI RGB
HDMI YCbCr 4:2:2
HDMI RGB
HDMI RGB
HDMI YCbCr 4:4:4
HDMI RGB
HDMI RGB 16-235 Video Level
HDMI 0-255 PC Level
HDMI 16-235 Video Level
HDMI YCbCr 4:4:4
HDMI YCbCr 4:2:2
HDMI YCbCr 4:4:4
