45
5.4.2 INPUT PORT CONFIGURATION
• You can define names for each input port, to help with identification
• Maximum number of characters in the text box is 20
• Clear the name by pressing the
action button
5.4.3 AUDIO DELAY
This option sets the audio delay, or time difference, between the audio input and audio output of
Crystalio II
.
Since all video processors require a period of time to deinterlace and scale video this option allows the audio
to be synchronized to the video.
• Audio delay can only be applied to audio passed thru
Crystalio II
. It cannot be applied
to audio passed directly to an audio processor or surround controller
• Delay settings may vary between video sources and video standards.
A delay setting of between 25 and 85 milliseconds can be considered normal
• Each video input source has a different audio delay setting
•
Crystalio II
already has an estimation of audio delay on different kinds of video sources; therefore
the actual audio delay is
Crystalio II’s
estimation plus your setting here. If you find the audio delay
of
Crystalio II’s
estimation alone is already too much for an input source, you can adjust the audio
delay setting to a negative value
• See
Section
5.4.1
to define audio input to video input mapping
• Use the
Left/Right
arrow remote control keys to adjust the slider
• When
OK
is pressed on the remote control, the whole OSD is hidden and only the slider control
is shown at the lower left corner of the display
• Pressing
Back
on the remote control will return you to the full OSD, or simply press the
Menu
key to exit from OSD mode
• Units of audio delay are 1 millisecond steps
