32
• Use the
Left/Right
arrow remote control keys to adjust the sliders
• Use the
Up/Down
arrow remote control keys to select between
R, G, B Offset
,
and
R, G, B Gain
• When
OK
is pressed on the remote control, the slider control is moved to the lower left corner of the display
• When the
light
is pressed on the remote control, the whole OSD is hidden but adjustments are still possible
• Pressing
Back
on the remote control will return you to the full OSD, or simply press the
Menu
key to exit
from OSD mode
See
Section
4.6.3
for more information on when to use these controls during setup.
5.2.3 GAMMA CORRECTION
This option allows the user to correct the Gamma of the image from an Input source. This should be done after
Gamma correction of the Crystalio Output. There are several preset curves to choose from
and the amount of correction is adjustable by pressing the
action button and moving the slider.
Custom Gamma Correction curves can also be created (see
Section
7.3
).
When Black Enhancer is turned on, shadow details of the image are improved
When the
action button is pressed, the OSD turns to the following page:
• Type is either
Standard
,
Low IRE
,
High IRE
, or
S-Shape
• Values can be positive or negative
• A value of '0' results in no gamma correction. The diagram below illustrates the shape
of the correction curves
• Use the
Left/Right
arrow remote control keys to adjust the Gamma curve
• When
OK
is pressed on the remote control, the slider control is moved to the lower
left corner of the display
• When the
light
is pressed on the remote control, the whole OSD is hidden but
adjustments are still possible
• Pressing
Back
on the remote control will return you to the full OSD, or simply
press the
Menu
key to exit from OSD mode
