Piusi V100, Instructions For Installation, Use And Maintenance Manual, Page: 43 / 64

43
/124 43
/60
EN
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
Translated from Italian
EQUIPMENT
MISUSE
Misuse can
cause death
or serious
injury
!
Do not operate the unit when fatigued or under the influence of drugs or al-
cohol.
Do not leave the work area while equipment is energized or under pressure.
Turn off all equipment when equipment is not in use.
Do not alter or modify equipment. Alterations or modifications may void agen-
cy approvals and create safety hazards.
Route hoses and cables away from traffic areas, sharp edges, moving parts,
and hot surfaces.
Do not kink or over bend hoses or use hoses to pull equipment.
Keep children and animals away from work area.
Comply with all applicable safety regulations.
Do not exceed the maximum operating pressure or the temperature of the
part with lower nominal value of the system. See Technical Data in all equip-
ment manuals.
Use fluids and solvents that are compatible with the wetted part of the system.
See Technical Data in all equipment manuals. Read the manufacturer’s instruc-
tions of the fluids and solvents. For more information on the material, request
the safety data sheet (MSDS) from the distributor or dealer.
Check the equipment every day. Immediately repair or replace worn or
damaged parts only with original spare parts of the manufacturer.
Make sure the equipment is classified and approved compliant with the stan-
dards of the environment where it is used.
Use the equipment only for the intended use. Contact your distributor for
more information.
Keep hoses and cables far from traffic areas, sharp edges, moving parts and
hot surfaces.
Do not bend or overbend the hoses or use the hose to pull the equipment.
TOXIC FLUID
OR FUMES
HAZARD
Read MSDS’s to know the specific hazards of the fluids you are using.
Store hazardous fluid in approved containers, and dispose of it according to
applicable guidelines.
Prolonged contact with the treated product may cause skin irritation: always
wear protective gloves during dispensing.
7 FIRST AID RULES
Electrocu-
tion
disconnect the unit from the mains, or use a dry insulator as protection while
moving the electrocuted person far from any conductor. Do not touch the
electrocuted person with bare hands until he/she is far from any conductor.
Ask qualified and trained people for help immediately
SMOKING
PROHIBITED
When operating the dispensing system and in particular during refuelling, do
not smoke and do not use open flame.