9
/124
9
/48
EN
This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.
translated from Italian
FULL PACK MC BOX etl
7
MACHINE AND MANUFACTURER IDENTIFICATION
The MC BOX B.SMART stations are equipped with an identification plate
attached to the frame:
- Model
- Serial number /
Year of manufacture
- Technical data
- CE marking
- Manual code
WARNING
Before installation, always check that the dispensing system model
is correct and suitable for the supply currently available (Voltage /
Frequency).
7.1
POSITION OF THE PLATES
Some stickers and/or plates are applied to the MC BOX B.SMART to
indicate the most relevant information to the operator. It is necessary to
check that these do not deteriorate or detach over time.
NOTE
Should this occur, please contact our customer assistance office so
that we can send you copies of the spoilt or missing plates/labels for
reapplication where originally provided.
The following labels are present:
1 CE plate with technical data
F00599020
MC BOX 120V B.SMART
ETL 10 ACCESS
1234567
2 Corner label plate applied on the box
MADE in ITALY
ZONE “0”
ZONE “1”
ZONE “2”
3 Adhesive for prohibiting the use of smartphones
in the vicinity of the dispenser during dispensing
After activation of the dispensing, during refilling
operations, do not use your smartphone less than
30 cm from the dispenser.
APPLICATION CHARGED TO THE INSTALLER
To be applied in case MC BOX B.SMART is installed
near a classified area
MCBox ETL-
4 - Product warranty label