manualshive.com logo in svg

Piusi MC BOX B.SMART, Installation - Use - Maintenance, Page: 46 / 48

Share
Download
Piusi MC BOX B.SMART Installation - Use - Maintenance Download Page 46

46 

/48

Installation, use and maintenance

M0583

5 What if I can't dispense via 

authentication with iButton?

There are a few possible cases:

• 

Dispensing memory full

• 

Tank empty

• 

iButton not associated with any driver

In detail:  

Dispensing memory full and tank empty

• NOT FOR RESALE  • NICHT EICHFÄHIG  • PARA UTILISACION EXCLUSIVA DEL USUARIO  • 

INTERDIT POUR TOUTES TRANSACTIONS COMMERCIALES OU FISCALES • APPARECCHIO 

NON  IDONEO  ALLA  MISURAZIONE  DI  PRODOTTI  PER  LA  VENDITA  AL  PUBBLICO  •  NE  È 

VIETATO L’USO IN RAPPORTO A TERZI • CIRC. MIN. N°67 DEL 25/07/1996 •

MADE in ITALY

0.00

The red LED to the right of the controller display is on. This 

may indicate problems in the memory (dispensing memory full) 

or tank empty. 

To empty the dispensing memory, synchronize with the cloud. If 

the problem is not solved, reset the controller

iButton not associated with any driver

• NOT FOR RESALE  • NICHT EICHFÄHIG  • PARA UTILISACION EXCLUSIVA DEL USUARIO  • 

INTERDIT POUR TOUTES TRANSACTIONS COMMERCIALES OU FISCALES • APPARECCHIO 

NON  IDONEO  ALLA  MISURAZIONE  DI  PRODOTTI  PER  LA  VENDITA  AL  PUBBLICO  •  NE  È 

VIETATO L’USO IN RAPPORTO A TERZI • CIRC. MIN. N°67 DEL 25/07/1996 •

MADE in ITALY

0.00

When the iButton is placed on the reader the display does not 

light up

6 What if a driver changes his 

phone number and keeps the 

same smartphone?

If a driver changes number it is necessary to inform the 

manager, who will change it from the driver's card in the 

WebApp (see also the manual of the WebApp, chapter 

"DRIVER DETAIL").

In the APP, the number is automatically updated the first time 

you connect to the cloud. From now on the mobile phone 

number will be the one to be used to access the APP.

In addition, in the case of mobile number portability between 

different mobile operators, it is likely that for a few days 

the mobile number will be the temporary one, and then the 

mobile number will be the same again as soon as portability is 

complete. In this case, during the transition period, there is no 

need to notify the site manager of the temporary number, you 

can continue to use your original telephone number. 

Summary of Contents for MC BOX B.SMART

















































Reviews:

No comments