manualshive.com logo in svg

Piusi MC BOX B.SMART, Installation - Use - Maintenance, Page: 41 / 48

Share
Download
Piusi MC BOX B.SMART Installation - Use - Maintenance Download Page 41

41

/124

41 

/48

EN

This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden. 

translated from Italian

FULL PACK MC BOX etl

• NOT FOR RESALE  • NICHT EICHFÄHIG  • PARA UTILISACION EXCLUSIVA DEL USUARIO  • 

INTERDIT POUR TOUTES TRANSACTIONS COMMERCIALES OU FISCALES • APPARECCHIO 

NON  IDONEO  ALLA  MISURAZIONE  DI  PRODOTTI  PER  LA  VENDITA  AL  PUBBLICO  •  NE  È 

VIETATO L’USO IN RAPPORTO A TERZI • CIRC. MIN. N°67 DEL 25/07/1996 •

MADE in ITALY

• NOT FOR RESALE  • NICHT EICHFÄHIG  • PARA UTILISACION EXCLUSIVA DEL USUARIO  • 

INTERDIT POUR TOUTES TRANSACTIONS COMMERCIALES OU FISCALES • APPARECCHIO 

NON  IDONEO  ALLA  MISURAZIONE  DI  PRODOTTI  PER  LA  VENDITA  AL  PUBBLICO  •  NE  È 

VIETATO L’USO IN RAPPORTO A TERZI • CIRC. MIN. N°67 DEL 25/07/1996 •

MADE in ITALY

0.00

• NOT FOR RESALE  • NICHT EICHFÄHIG  • PARA UTILISACION EXCLUSIVA DEL USUARIO  • 

INTERDIT POUR TOUTES TRANSACTIONS COMMERCIALES OU FISCALES • APPARECCHIO 

NON  IDONEO  ALLA  MISURAZIONE  DI  PRODOTTI  PER  LA  VENDITA  AL  PUBBLICO  •  NE  È 

VIETATO L’USO IN RAPPORTO A TERZI • CIRC. MIN. N°67 DEL 25/07/1996 •

MADE in ITALY

0.00

Driver authentication via i-Button

• NOT FOR RESALE  • NICHT EICHFÄHIG  • PARA UTILISACION EXCLUSIVA DEL USUARIO  • 

INTERDIT POUR TOUTES TRANSACTIONS COMMERCIALES OU FISCALES • APPARECCHIO 

NON  IDONEO  ALLA  MISURAZIONE  DI  PRODOTTI  PER  LA  VENDITA  AL  PUBBLICO  •  NE  È 

VIETATO L’USO IN RAPPORTO A TERZI • CIRC. MIN. N°67 DEL 25/07/1996 •

MADE in ITALY

• NOT FOR RESALE  • NICHT EICHFÄHIG  • PARA UTILISACION EXCLUSIVA DEL USUARIO  • 

INTERDIT POUR TOUTES TRANSACTIONS COMMERCIALES OU FISCALES • APPARECCHIO 

NON  IDONEO  ALLA  MISURAZIONE  DI  PRODOTTI  PER  LA  VENDITA  AL  PUBBLICO  •  NE  È 

VIETATO L’USO IN RAPPORTO A TERZI • CIRC. MIN. N°67 DEL 25/07/1996 •

MADE in ITALY

8.8:8.8

.

• NOT FOR RESALE  • NICHT EICHFÄHIG  • PARA UTILISACION EXCLUSIVA DEL USUARIO  • 

INTERDIT POUR TOUTES TRANSACTIONS COMMERCIALES OU FISCALES • APPARECCHIO 

NON  IDONEO  ALLA  MISURAZIONE  DI  PRODOTTI  PER  LA  VENDITA  AL  PUBBLICO  •  NE  È 

VIETATO L’USO IN RAPPORTO A TERZI • CIRC. MIN. N°67 DEL 25/07/1996 •

MADE in ITALY

0.00

Dispensing start

• NOT FOR RESALE  • NICHT EICHFÄHIG  • PARA UTILISACION EXCLUSIVA DEL USUARIO  • 

INTERDIT POUR TOUTES TRANSACTIONS COMMERCIALES OU FISCALES • APPARECCHIO 

NON  IDONEO  ALLA  MISURAZIONE  DI  PRODOTTI  PER  LA  VENDITA  AL  PUBBLICO  •  NE  È 

VIETATO L’USO IN RAPPORTO A TERZI • CIRC. MIN. N°67 DEL 25/07/1996 •

MADE in ITALY

1.59

• NOT FOR RESALE  • NICHT EICHFÄHIG  • PARA UTILISACION EXCLUSIVA DEL USUARIO  • 

INTERDIT POUR TOUTES TRANSACTIONS COMMERCIALES OU FISCALES • APPARECCHIO 

NON  IDONEO  ALLA  MISURAZIONE  DI  PRODOTTI  PER  LA  VENDITA  AL  PUBBLICO  •  NE  È 

VIETATO L’USO IN RAPPORTO A TERZI • CIRC. MIN. N°67 DEL 25/07/1996 •

MADE in ITALY

2.50

Dispensing end

• NOT FOR RESALE  • NICHT EICHFÄHIG  • PARA UTILISACION EXCLUSIVA DEL USUARIO  • 

INTERDIT POUR TOUTES TRANSACTIONS COMMERCIALES OU FISCALES • APPARECCHIO 

NON  IDONEO  ALLA  MISURAZIONE  DI  PRODOTTI  PER  LA  VENDITA  AL  PUBBLICO  •  NE  È 

VIETATO L’USO IN RAPPORTO A TERZI • CIRC. MIN. N°67 DEL 25/07/1996 •

MADE in ITALY

0.00

Summary of Contents for MC BOX B.SMART

















































Reviews:

No comments