3-10
SDC927D
3 • Programming
You now need to tell the system in which direction to read the scan code:
018> OMR scanning : NORMAL
<-->=SELECT Green=CONFIRM Blue=EXIT
The options available are:
NORMAL
Where the system will expect the Bench Mark to be
the FIRST mark in the scan code.
REVERSE
Where the system will expect the Bench Mark to be
the LAST mark in the scan code.
Use the
Arrow Buttons
to select the option you want, then press
Green
to
confirm.
NOTE:
Take into account the direction of feed of your material when making this
setting. i.e. whether the material is being fed top first or bottom first. The
setting selected must match whether the Bench Mark is fed past the scanner
first or last.
The display will return to the program listing display.
Programming an OMR scanning job is now complete.
Summary of Contents for F767
