Pitney Bowes F767, Operator'S Manual

Page: 31 / 66

SDC927D
2-15
Operation • 2
Raise the F767 Top Cover and
lower the Front Cover.
Rotate knob g clockwise to set the
Accumulator Side Guides. The
correct setting allows approximately
3mm overall clearance so that
the material is controlled but not
restricted.
Setting the
Accumulator
Side Guides
Lower the Front Cover and turn
knob g anticlockwise to open the
Accumulator Side Guides. Close
the Front Cover.
Load a sheet or booklet.
Press Run Confirm (Green) until
a piece is fed into the accumulator
area.
Transport
Material to
Accumulator
Accumulator
Ramp
Adjustment
Ensure a piece of material is in
the accumulator area as in the
Accumulator Side Guide setting
above.
Squeeze the tabs e together and
slide the ramp until the yellow
indicators on the ramp align with
the material rear edge.
Close all covers.