Pitney Bowes F767, Operator'S Manual

Page: 23 / 66

SDC927D
2-7
Operation • 2
Place material
(2-10 pieces)
into
the feed deck area (A) before
loading material onto the belts.
Then load the bulk of the material
shingled as shown on the right.
Set the Scanning
Head
The Scanning Head is used to read OMR/BCR/OCR/2D Matrix scan marks
printed on your material. If you are using this option, carry out the following
settings. If you don’t use this option, continue with ‘Setting the Material
Guide Fingers’ on page 2-10.
F772- Position the material as
shown on the right and move
backstop position to within 3mm
of material.
Lock the backstop knob.
A
Place material (100-200 sheets)
into the feed deck area (A) before
loading material onto the belts.
Then load the bulk of the material
shingled as shown on the right.
A