Pitney Bowes F767, Operator'S Manual

Page: 24 / 66

2-8 SDC927D
2 • Operation
Bottom Scanning
Connect power and turn ON. Open the Top and Front Covers.
Open the separator. Unlock lever
a , turn knob c clockwise as far as
it will go and hold in position while
locking lever a .
The OMR scan marks are read from the underside of the sheet and so to be
able to set the scanner position, you must mark their position on the upper
face of the sheet.
Slide a sheet under the separator and observe the scanner beam on the
sheet.
Adjust the scanner side to side until
the beam is centred on the scan
marks by manually sliding the scanner.
Close the covers.
Side to Side
Adjustment of
OMR Scanners