manualshive.com logo in svg

Pitney Bowes 1630, Operating Manual, Page: 117 / 160

Share
Download
Pitney Bowes 1630 Operating Manual Download Page 117

17 - 5

T R O U B L E S H O O T I N G   A N D   R O U T I N E   M A I N T E N A N C E

Paper is Jammed in the Multi-purpose Paper Cassette

1

Pull the paper cassette out of the
machine.

2

Remove any crinkled sheets.

3

Adjust the guides to fit.

4

Press down the paper to flatten it in the paper cassette.

5

Reinstall the paper cassette.

Paper is Jammed near the Drum Unit

1

Open the front cover.

2

Remove the drum unit but do not force it if it cannot be removed easily.
Instead, pull the edge of the jammed paper from the paper cassette.

     

3

Gently pull out the jammed paper.

4

Reinstall the drum unit.

5

Close the front cover.

Paper is Jammed in the Fuser Unit

1

Open the rear cover.

2

Pull out jammed paper. When you
have to pull paper out the back of
the machine, the fuser may get
dirty with toner powder causing the
next few printed page(s) to look
messy. Print a few copies  of the
test page until the pages print clearly.

3

Close the rear cover.

Summary of Contents for 1630

































































































































































Reviews:

No comments