13
EN
EN
G
LI
SH
15. INSTALLING THE POWER CORD
NOTE:There are two Power Cords supplied. Select the Power Cord that is
required for your region.
Parts Required:
1
x
Power Cord Clip (#29)
1
x
Power Cord (#30 or #31)
Installation:
•
Place the Power Cord Clip on the Power Cord. Then, insert the Power
Cordinto the groove at the bottom of the unit. Note 15A.
•
Secure the Power Clip to the bottom panel using the pre-installed
screw, as shown. Note 15B.
16. CONNECTING TO A POWER SOURCE
•
STANDARD OUTLET
This appliance requires 220-240 Volt, 50 Hz, 275 W. It must be a
grounded plug. Ensuregrounded end is not broken off before use.The
control usesa 220-240volt, fast-blow fuse to protect the board from
the ignitor.
IMPORTANT: Disconnectunit from power sourcewhen not in use.
15
15B
15A
29
30/31
16
