TROUBLESHOOTING
15
Leaks at connection between braided air hose
Requires disassembly of air hose assembly for repairs;
and fitting
contact factory or factory authorized repair center.
Leaks down barrel
Check front of cup seal where it touches the valve
for any wear or grooves. Replace if leak continues.
Leaks at body of marker or heavily down
Requires removal of valve and inspection
the barrel
of front valve O-ring (can be replaced with
bottle O-rings), cup seal and valve surface where
the cup seal touches the valve. A valve installed
backwards will cause a leak. Never use a screw
driver or metal object to remove or install a
valve body. Use a pencil eraser or other soft
instrument.
Leaks at connection between gas-through
Remove foregrip unit and check O-rings
foregrip & vertical ASA
Replace with tank O-rings if worn or broken.
Leak in pressure source between tank valve
Do not fill cylinder. Immediately take to qualified
and cylinder
personnel for inspection. Cylinder must be drained.
Leaks at connection between ASA and tank
Check tank O-ring at connection or on remote
hose connector.
AIR LEAK
Manual_Piranha_6.0_eng_fr_sp.qxp 2/6/08 5:03 PM Page 16
