VALVE REMOVAL CONTINUED
14
Figure 29
Figure 30
Questions about the operation of the KEE Piranha
®
paintball marker may be directed to: KEE Action Sports,
570 Mantua Blvd., Sewell, NJ 08080 USA; phone: 1.800.724.6822 or keeactionsports.com for any updates
regarding your Piranha
®
purchase.
6. The valve body must be inserted correctly with the raised flat surface of the valve and larger hole pointing
towards the front of the marker. Be careful reinserting the valve body. Any scratches to the front can cause
leaks. Use a flat ended wooden dowel or the eraser end of a pencil to push the valve body into the front
of the receiver. See Figure 31. The valve pin assembly must be inserted correctly into the valve; valve pin
must drop down into valve body completely.
Figure 31
DO NOT ATTEMPT TO PERFORM MAINTENANCE PROCEDURES UNLESS QUALIFIED TO DO SO.
THIS TROUBLESHOOTING GUIDE DOES NOT COVER ALL SITUATIONS AN INDIVIDUAL MAY ENCOUNTER.
CONTACT KEE FOR REPAIR ASSISTANCE AND INFORMATION REGARDING AUTHORIZED KEE PIRANHA
®
REPAIR
FACILITIES. PHONE 1.800.724.6822 WEB KEEACTIONSPORTS.COM
THE PAINTBALL MARKER AIR SYSTEM MUST BE REPAIRED OR REPLACED WITH THE CORRECT PRESSURE
RATED COMPONENTS.
BEFORE DISASSEMBLY OF THE MARKER, REMOVE AIR SOURCE; REMOVE ALL PAINTBALLS FROM THE MARKER, BARREL, AND LOADER.
TO CHECK IF THE MARKER IS UNLOADED:
REMOVE AIR SYSTEM
AND
SHOOT MARKER IN A SAFE DIRECTION.
REMOVE HOPPER, VISUALLY INSPECT CHAMBER FOR A PAINTBALL, REMOVE AND INSPECT BARREL FOR THE PRESENCE OF A PAINT-
BALL. NEVER LOOK DOWN THE BARREL OF ANY PAINTBALL MARKER ONCE THE BARREL IS SCREWED INTO THE MARKER.
THE PAINTBALL MARKER AIR SYSTEM MUST BE REPAIRED OR REPLACED WITH THE CORRECT PRESSURE RATED COMPONENTS.
W
WA
A R
R N
N II N
N G
G
Manual_Piranha_6.0_eng_fr_sp.qxp 2/6/08 5:03 PM Page 15