Manual for StealthTouch M5-M7 with Core Pentium & Core i-Series Model v1.0
Page 9
Chapter 2: Setting up PioneerPOS system
2.1
Connecting power
If your system comes with a base, you just need to locate the power cord and plug it to a surge protector or uninterruptible
power supply (UPS) Unit.
[Caution]
Do not plug in the unit directly into a wall outlet. Lightning or power surge may damage the system. Always
connect the power through a surge protector or uninterruptible power supply (UPS) unit.
2.2
Connecting cables to I/O panel
1.
Tilt the terminal, then remove one
Phillips M3 x 6 Big-Cap Black
(P/N: 10-S3006BB) screw.
M5
M7
2.
Pull I/O Port Cover outward.
3.
Gently pull the base back cover outward.
[Note]
If there are optional screws at both sides of the base back cover, remove them.
4.
Route cables of peripherals to the front.
5.
Connect cables to respective ports.
