PIONEERPOS StealthTouch M5, User Manual

Page: 33 / 33

Manual for StealthTouch M5-M7 with Core Pentium & Core i-Series Model v1.0 Page 33
WARNING:
This section is written for TECHNICALLY QUALIFIED PERSONNEL ONLY. Modifying jumper setting to other than
manufacturer default setting may result in damages of device. PioneerPOS will not be responsible for loss and
damages on StealthTouch terminal and any other devices due to user modification. Call 909-468-9757 or email
support@pioneerpos.com for help.
J10-J13: Panel ID Selection
Connector: HEADER 1X2P,S/T,2.0MM DIP
Jumper: MINI JUMPER 2P,2.0MM,F,SMT
J13 J12 J11 J10 Panel type
Open Open Open Open 640x480_18bit_60Hz
Open Open Open Close 800x480_18bit_60Hz
Open Open Close Open 800x600_18bit_60Hz
Open Open Close Close 1024x600_18bit_60Hz
Open Close Open Open 1024x768_18bit_60Hz
Open Close Open Close 1024x768_24bit_60Hz (default)
Open Close Close Open 1280x768_24bit_60Hz
Open Close Close Close 1280x1024_48bit_60Hz
Close Open Open Open 1366x768_24bit_60Hz
Close Open Open Close 1440x900_48bit_60Hz
Close Open Close Open 1600x1200_48bit_60Hz
Close Open Close Close 1920x1080_48bit_60Hz
Close Close Open Open 1920x1200_48bit_60Hz
Others
Reserved
J20-J22: Boot Display Device
Connector: HEADER 1X2P,S/T,2.0MM DIP
Jumper: MINI JUMPER 2P,2.0MM,F,SMT
J22 J21 J20 Boot display
Open Open Open Auto (default)
Open Open Close CRT
Open Close Open HDMI
Close Open Open LVDS
Others Reserved
[End of document]
Pin 1
Pin 1
Pin 1
Pin 1
Pin 1 Pin 1
Pin 1