XV-DVR9H
176
1
2
4
1
2
3
4
C
D
F
A
B
E
(2) Overview of the diagnosis items
How to start/terminate the diagnostic program
HDD Information
This is a display for checking the HDD information, such as the model name of the
HDD, continuous power-on time, authentication status, and results of the diagnosis on
the end of service life.
Time required for testing: Approx. 30 sec.
SELF TEST
This is a simplified diagnosis for the HDD.
A serious failure in the HDD can be detected with this test.
Time required for testing: Approx. 90 sec.
EXTENDED SELF TEST
This is a reading test across all sectors of the HDD.
Data recorded on the HDD will not be erased, because no writing operation is
performed.
Time required for testing: Approx. 40 min/80 GB
HDD Read / Write Check
This is a writing, reading, and comparing test across all sectors of the HDD.
All data recorded on the HDD will be erased
, because all the data are to be
overwritten.
Be sure to obtain your client's consent beforehand.
Time required for testing: Approx. 7 hours/80 GB
Use the remote control unit for servicing.
How to start: Press the "ESC", "CX", "0", and "1" keys simultaneously.
How to terminate: Press the "ESC" key.
Do NOT perform other operations on the unit while the HDD diagnosis is in progress. Although the diagnostic program is
designed to function independently from the unit's functions, an operation on the unit during a diagnosis may cause a
malfunction.
The status of the unit recommended during diagnosis is as follows: All stop, no timer recording, and Input selection to L1-L3.
2. How to start or terminate the diagnostic program
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
