XV-DVR9H
123
5
7
8
5
6
7
8
C
D
F
A
B
E
7.1.8 VIDEO ADJUSTMENT FOR SPECIFIC AREA
Purposes:
Depending on the area, jitter may appear in a picture received by the tuner, as conditions of signals received by
the tuner are different from area to area. To correct this kind of problem, the function of the System Codec AVIO
control section for adjusting signals received by the tuner can be used.
How to enter setting modes:
To enter General Setting mode, press the ESC key then the CHP/TIM key of the remote
control
unit for service. To enter Specific Channel Setting mode, press the DIG/ANA key in General
Setting mode.
How to exit setting modes:
Press the ESC key. The setting mode is exited, the OSD disappears.
1. General Setting mode
This mode can be entered only during recording/playback stop. In this mode, each item and its current settings are displayed on the OSD.
The currently selected input mode (TUNER or LINE) is displayed. If L1, L2, L3 or DV is selected for input, general settings for the line
input can be made, and if TUNER is selected, general settings for the tuner input can be made.
[General Setting mode]
(A picture from the tuner can be viewed using the semitransparent OSD display.)
∗
: setting is the default.
Table 1: Key operations in General Setting mode
(effective only during recording/playback stop)
∗
R: Refers to keys on the remote control unit supplied with this unit. The keys without "R" refer to the remote control unit for service.
Key
Operation
Setting (
∗
: Default)
Remarks
INPUT SELECT,
C/– (
∗
R) (
∗
2)
Switches inputs or channels.
TUNER / LINE
–
[SIDE A], [SIDE B] (
∗
1)
Sets Sync AGC.
[SPEED +], [SPEED -] (
∗
1) HD Err Det
ON (
∗
) / OFF
–
Normal (
∗
) /Short/Long
–
[Rev STILL STEP],
[STILL STEP Fwd] (
Normal (
∗
) /Non STD
Normal (
∗
) /Fast/Stop
–
–
–
–
[Rev
×
3], [
×
3 Fwd]
(
∗
1)
Sets Threshold level.
(
∗
) Normal
Auto Threshold Level
Manual Threshold Level
Pedestal Level
–
[Rev CHAPTER SKIP]
[CHAPTER SKIP Fwd]
(
∗
1)
According to the setting of Threshold,
the values can be changed within the
range mentioned below.
–
• Normal:
The value is fixed, with no display of
the value.
–
• Auto Threshold Level:
0-8 (Default: 0)
• Manual Threshold Level:
0-8 (Default: 0)
• Pedestal Level:
0-8 (Default: 0)
CLEAR (
∗
1)
Initializes the setting of General
Setting mode.
–
Pressing the key resets all settings
(
1
-
3
of Table 2) of General Setting
mode to the initial values. Settings
of Specific Channel Setting mode
are not affected (they are retained).
ESC
Exits AVIO setting for specific areas,
clearing the OSD. (Tuner screen appears)
–
–
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
