XV-DVR9H
117
5
7
8
5
6
7
8
C
D
F
A
B
E
7.1.5 ERROR RATE MEASUREMENT
How to enter Error-Rate Measurement mode
Press the ESC key then the SIDE-B key of the remote control unit for service to enter Error-Rate Measurement mode. During playback of
DVD-VIDEO, Error-Rate Measurement mode can also be entered by pressing the ESC key then the PLAY key.
How to exit Error-Rate Measurement mode
Press the ESC key. The error-rate display disappears, and Error-Rate Measurement mode is exited.
Note:
The error rate cannot be measured in VR mode or during CD playback.
Functions
1
Video-mode recording (recording medium)
In this mode, DVD recording is automatically performed for 10 seconds, the recorded DVD title is played back while the error rate is
being measured, then as soon as playback of the recorded DVD title is finished, playback stops.*1 After error-rate measurement is
finished, the average error rate will be displayed on the FL display and OSD. Only in a case in which the calculation of the average error
rate fails, the tray will open.
2
DVD-VIDEO (playback medium)
Only during playback, when the ESC key then the SIDE-B key (or the ESC key then the PLAY key) are pressed, the error rate is
calculated and displayed on the FL display and OSD.(
∗
2) Only in a case in which the calculation of the average error rate fails, the tray
will open.
Changes of display
Table 1: Video mode (recording medium)
E R R O R
R A T E
E R R O R
R A T E
x x x x x
E R
x . x E - x
E R
x . x E - x
E R R R A T E : x . x E - x -
E R R R A T E : x . x E - x
*
O K
Operation
Display
FL Display
OSD (On Screen Display)
"ERROR RATE" is displayed on the FL display for an instant.
DVD recording starts.
DVD recording is performed for 10 seconds.
The recorded DVD title is played back while the error rate is being measured,
then as soon as playback is finished it stops.
After error-rate measurement is finished (
∗
1), the average error rate, the
measurement-finish mark (
∗
), and the OK/NG-judgment result (
∗
3) will be
displayed on the FL display and OSD.
(If the tray opens as a result of NG judgment, the display on the FL display
and OSD will be retained.)
Table 2: DVD-Video (playback medium)
E R
x . x E - x
E R
x . x E - x
E R R R A T E : x . x E - x -
E R R R A T E : x . x E - x - O K
Operation
Display
FL Display
OSD (On Screen Display)
∗
2)
After error-rate measurement is finished (
∗
1), the average error rate, the
), and the OK/NG-judgment result (
∗
3) will be
displayed on the FL display and OSD.
(If the tray opens as a result of NG judgment, the display on the FL display and
OSD will be retained.)
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299