Pioneer VSX-9040TXH, Operating Instructions Manual

Page: 95 / 123

The system and the other setup
11
95
En
3 Select the ‘Video Input’ setting you want.
When the multi-channel in p ut is selected as an in p ut
function, you can dis p lay the video images of othe r in p ut
functions. The video in p ut can be selected f r om the
following: DVD , TV/SAT , DVR , VIDEO (VSX-9140TXH only) ,
VIDEO 1
,
VIDEO 2 (VSX-9040TXH only)
,
OFF
.
4 When you’re finished, press RETURN.
You will r etu r n to the
Other Setup
menu.
ZONE Audio Setup
If you’ve made MULTI-ZONE connections (see
Using the
MULTI-ZONE controls
on p age 69), you may need to
s p ecify you r volume setting.
1 Select ‘ZONE Audio Setup’ from the Other Setup
menu.
2 Select the volume level setting of ZONE 2
1
and
ZONE 3
(VSX-9140TXH only)
.
•
Variable
– Use this setting if you’ve connected a
p owe r am p lifie r in the sub r oom (this r eceive r is
sim p ly being used as a pr e-am p ) and you will be
using this r eceive r ’s cont r ols to adjust the volume.
• Fixed – Use this setting if you’ve connected a fully
integ r ated am p lifie r (such as anothe r Pionee r VSX
r eceive r ) in the sub r oom and want to use that
r eceive r ’s volume cont r ols.
With the Fixed setting, the sou r ce is sent f r om this
r eceive r at maximum volume, so make su r e the volume is
quite low in the sub zone at fi r st, and then ex p e r iment to
find the co rr ect level.
3 When you’re finished, press RETURN.
You will r etu r n to the Other Setup menu.
Power ON Level Setup
The volume can be set so that it is always set to the same
level when the
r eceive r ’s p owe r is tu r ned on.
1 Select ‘Power ON Level Setup’ from the Other
Setup menu.
2 Select the Power ON Level setting you want.
•
LAST
– When the p owe r is tu r ned on, the volume is
set to the same level as when the p owe r was last
tu r ned off.
• “ --- ” – When the p owe r is tu r ned on, the volume is set
to minimum level.
•
–80.0dB
to
+12.0dB
– S p ecify the volume to be set
when the p owe r is tu r ned, in ste p s of 0.5 dB.
It is not p ossible to set a volume level g r eate r than the
value s p ecified at Volume Limit Setu p .
3 When you’re finished, press RETURN.
You will r etu r n to the Other Setup menu.
Volume Limit Setup
Use this function to limit the maximum volume. The
volume cannot be inc
r eased above the level set he r e,
even by o p e r ating MASTER VOLUME button (o r the dial
on the f r ont p anel).
1 Select ‘Volume Limit Setup’ from the Other Setup
menu.
2 Select the Volume Limit setting you want.
•
OFF
– The maximum volume is not limited.
•
–20.0dB
/
–10.0dB
/
0.0dB
– The maximum volume is
limited to the value set he r e.
3 When you’re finished, press RETURN.
You will r etu r n to the Other Setup menu.
Note
1 If you selected ZONE 2 in the
Surround back speaker setting
on p age 91, you won’t be able to change the volume level.
4d2.Multi Ch In Setup
A/V RECEIVER
Exit Finish
SW Input Gain : +10dB
Video Input : DVD
2. Multi Ch In Setup
3. ZONE Audio Setup
4. Power ON Level Setup
5. Volume Limit Setup
6. Remote Control Mode Setup
7. Flicker Reduction Setup
1. KURO LINK Setup
4d.Other Setup
A/V RECEIVER
Exit Return
4d3.ZONE Audio Setup
A/V RECEIVER
Exit Finish
ZONE 2 Volume Level : Variable
ZONE 3 Volume Level : Variable
4d.Other Setup
A/V RECEIVER
Exit Return
3. ZONE Audio Setup
4. Power ON Level Setup
5. Volume Limit Setup
6. Remote Control Mode Setup
7. Flicker Reduction Setup
2. Multi Ch In Setup
1. KURO LINK Setup
4d4.Power ON Level Setup
A/V RECEIVER
Exit Finish
Power ON Level : LAST
4d.Other Setup
A/V RECEIVER
Exit Return
3. ZONE Audio Setup
4. Power ON Level Setup
5. Volume Limit Setup
6. Remote Control Mode Setup
7. Flicker Reduction Setup
2. Multi Ch In Setup
1. KURO LINK Setup
4d5.Volume Limit Setup
A/V RECEIVER
Exit Finish
Volume Limit : OFF
VSX-9140TXH_CUXJ.book 95 ページ ２００９年４月１６日 木曜日 午前１０時３６分