Controls and displays
04
23
En
English
Français
Deutsch
Nederlands
Italiano
Español
Direct function
• Default setting:
ON
You can use the direct function feature to
control one component using the remote
control while at the same time, using your
receiver to playback a different component.
When direct function is on, any component
you select (using the
MULTI CONTROL
buttons) will be selected by both the receiver
and the remote control. When you turn direct
function off, you can operate the remote
control without affecting the receiver.
1
While pressing the RECEIVER button,
press and hold the 4 button.
The LED blinks.
2
Press the MULTI CONTROL button for
the component you want to control.
The LED lights on continuously.
3
Use the number buttons to enter either
1 (direct on) or 2 (direct off).
The LED blinks again.
4
Repeat steps 2 through 3 for the other
components you want to control.
5
When you’re done, press
RECEIVER
.
Operating range of remote control
unit
The remote control may not work properly if:
• There are obstacles between the remote
control and the receiver’s remote sensor.
• Direct sunlight or fluorescent light is
shining onto the remote sensor.
• The receiver is located near a device that
is emitting infrared rays.
• The receiver is operated simultaneously
with another infrared remote control unit.
DOW
N
30
30
7 m (23 ft.)
DOW
N
DOW
N
VSX_518_KU.book 23 ページ ２００８年５月１５日 木曜日 午後６時３１分
