background image

56

 

 

 

 

07

Playback with NETWORK features

About network playback

The network playback function of this unit uses the following technologies:

Windows Media Player

See 

Windows Media Player 11/Windows Media Player 12

 on 

page 106

 for more on this.

DLNA

DLNA CERTIFIED

TM

 Audio Player

The Digital Living Network Alliance (DLNA) is a cross-industry organization of consumer electronics, comput-
ing industry and mobile device companies. Digital Living provides consumers with easy sharing of digital media 
through a wired or wireless network in the home.
The DLNA certification logo makes it easy to find products that comply with the DLNA Interoperability Guidelines. 
This unit complies with DLNA Interoperability Guidelines v1.5.
When a PC running DLNA server software or other DLNA compatible device is connected to this player, some 
setting changes of software or other devices may be required. Please refer to the operating instructions for the 
software or device for more information.

DLNA

TM

, the DLNA Logo and DLNA CERTIFIED

TM

 are trademarks, service marks, or certification marks of the Digital 

Living Network Alliance.

Content playable over a network

!

  Even when encoded in a compatible format, some files may not play correctly.

!

  Movie or Photo files cannot be played back.

!

  There are cases where you cannot listen to an Internet radio station even if the station can be selected from a 

list of radio stations.

!

  Some functions may not be supported depending on the server type or version used.

!

  Supported file formats vary by server. As such, files not supported by your server are not displayed on this unit. 

For more information check with the manufacturer of your server.

Disclaimer for Third Party Content

ACCESS TO THIRD PARTY CONTENT SERVICES, INCLUDING ALL ASSOCIATED FEATURES AND 
FUNCTIONALITIES, IS PROVIDED “AS IS,” “AS AVAILABLE” AND AT THE USER’S OWN RISK, WITHOUT 
WARRANTY OF ANY KIND. PIONEER DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, IN CONNECTION 
WITH ACCESS TO AND USE OF CONTENT SERVICES THROUGH THIS DEVICE, INCLUDING WITHOUT 
LIMITATION WARRANTIES OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR 
PURPOSE, AND NON-INFRINGEMENT. PIONEER DOES NOT GUARANTEE, REPRESENT, OR WARRANT 
THAT CONTENT SERVICES WILL BE FREE FROM ERRORS, INTERRUPTION, LOSS, CORRUPTION, ATTACK, 
VIRUSES, INTERFERENCE, HACKING, OR OTHER SECURITY INTRUSION, AND PIONEER DISCLAIMS ANY 
LIABILITY IN CONNECTION WITH THE FOREGOING. PIONEER IS NOT LIABLE OR RESPONSIBLE FOR ANY 
LOSS OR DAMAGE ARISING FROM ACCESS TO OR USE OF CONTENT. NO ORAL OR WRITTEN INFORMATION 
OR ADVICE GIVEN BY PIONEER OR ITS CUSTOMER SERVICES REPRESENTATIVES WILL CREATE ANY SUCH 
WARRANTY.
IN NO EVENT WILL PIONEER, ITS AFFILIATES, OR THEIR RESPECTIVE OFFICERS, DIRECTORS, OR EMPLOYEES 
BE LIABLE IN CONNECTION WITH YOUR USE OF THIRD PARTY CONTENT SERVICES THROUGH THIS DEVICE 
FOR PERSONAL INJURY OR SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY 
KIND, INCLUDING WITHOUT LIMITATION DAMAGES FOR ATTORNEY’S FEES, LOST DATA OR LOST PROFITS, 
REGARDLESS OF THE THEORY OF LIABILITY AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH 
DAMAGES. IN NO EVENT WILL PIONEER’S TOTAL LIABILITY TO YOU FOR ALL DAMAGES ARISING FROM THE 
USE OR INABILITY TO USE THIRD PARTY CONTENT SERVICES (OTHER THAN AS MAY BE REQUIRED BY LAW 
IN CASES INVOLVING PERSONAL INJURY) EXCEED $10.00. THE FOREGOING LIMITATIONS WILL APPLY EVEN 
IF THE ABOVE REMEDY FAILS OF ITS ESSENTIAL PURPOSE. IF ANY APPLICABLE AUTHORITY HOLDS ANY 
PORTION OF THIS SECTION TO BE UNENFORCEABLE, THEN LIABILITY WILL BE LIMITED TO THE MAXIMUM 
EXTENT PERMITTED BY APPLICABLE LAW.

About playback behavior over a network

!

  Playback may stall when the PC is switched off or any media files stored on it are deleted while playing content.

!

  If there are problems within the network environment (heavy network traffic, etc.) content may not be displayed 

or played properly (playback may be interrupted or stalled). For best performance, a 100BASE-TX connection 
between player and PC is recommended.

!

  If several clients are playing simultaneously, as the case may be, playback is interrupted or stalled.

!

  Depending on the security software installed on a connected PC and the setting of such software, network 

connection may be blocked.

Pioneer is not responsible for any malfunction of the player and/or the NETWORK features due to communica-
tion error/malfunctions associated with your network connection and/or your PC, or other connected equipment. 
Please contact your PC manufacturer or Internet service provider.

“Windows Media

TM

” is a trademark of Microsoft Corporation.

This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a 
license from Microsoft Licensing, Inc.
Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the 
United States and/or other countries.

Summary of Contents for VSX-1028-K


















































































































Reviews: